Cylinder size is 2" rod diameter x 4" bore inside diameter, that is what you will get with this listing.

There are other size options so please verify that you have the correct size.

The standard size stabilizers are 2" x 3-1/2"

Kits do not include instructions, read and follow equipment manufacturers' instructions for replacing seals. Some kits may include extra parts because they are made to fit the design variations of a particular model. Kits for rod glands with pressed in metallic bearings (such as bronze) generally will not contain a replacement bearing, however phenolic & plastic bearings are normally included. If a bearing is available separately we will let you know. Because seal designs are continuously improving, and because of possible previous repairs, some kits may have a different seal design than the seal you remove, however, unless the original seal grooves were machined in a previous repair the replacement seals should fit & function properly. Never attempt to service a pressurized cylinder, or a cylinder connected to a load, never use air or hydraulic pressure to disassemble a cylinder. These are top quality aftermarket replacement parts, we are not affiliated with any equipment manufacturer.

Most orders ship within 24 hours, if an item is out of stock, we will notify you ASAP.