** This is the last available, this product will be obsoleted when stock is depleted, colors may vary.

Hydraulic Seal Kit for Ford 555 Backhoe Stabilizer Cylinder Oct. '78 to Jan. 31 '83 For 2 piece piston type cylinder. If your chrome rod measures 50mm (2") this is most likely the kit, however if the piston has been updated (not original ) you will need the 1 piece kit.

If you don't know your machine year, send me the unit code / production code from your machine, usually stamped on the side of the engine & several other places. Examples: 2A14B or 8F2B etc.

If you have any questions please call 207-744-4028 or TOLL FREE 877-977-KITS.

Kits do not include instructions, read and follow equipment manufacturers' instructions for replacing seals. Because seal designs are continuously improving, and because of possible previous repairs, some kits may have a different seal design than the seal you remove, however, unless the original seal grooves were machined in a previous repair the replacement seals should fit & function properly. Never attempt to service a pressurized cylinder, or a cylinder connected to a load, never use air or hydraulic pressure to disassemble a cylinder. These are top quality aftermarket replacement parts, we are not affiliated with any equipment manufacturer.